Three reasons for deformation of hot press machine

In the production process of hot press machines, deformation is one of the problems that cannot be ignored, which directly leads to a decline in product quality; So even solving the deformation problem of the hot press is very important. To solve a problem, it is necessary to first understand the cause of the problem before analyzing it specifically. Today, we will briefly understand the reasons that cause deformation of the hot press machine.

1. When heating with steam, sometimes the steam pipeline of the hot press plate may become blocked and not smooth, resulting in uneven heating. Once the temperature rise rate of each part of the hot press plate is inconsistent, it can cause hot press deformation.

2. It may be caused by uneven heating. If the temperature rises too quickly during the preheating of the hot press, deformation is more likely to occur when it is in a cold state during startup preheating.

3. If the hot press is not smooth, causing collision between the rear slab and the front rough slab, it is easy to pile up fibers in the front of the slab. If not detected in a timely manner, the pressure increase of the hot press machine will greatly cause deformation and bending of the hot press plate.

I hope the above points can provide you with some practical help and help you use the hot press more smoothly.